17. External Interface
17-10
17.3 FTP
You can use the Ethernet connector on the rear panel to perform file transfer operations such
as dumping data from the LV 5330 to a PC.
17.3.1 Procedure
1 Configure the LV 5330 Ethernet settings, and connect an Ethernet cable.
For more detailed instructions, see steps 1 through 3 in section 17.2.1, “Procedure.”
2 Start
FTP.
After you start FTP, the following display appears.
For information on how to start FTP, see your PC user’s manual.
User:
3 Enter the user name, and press Enter.
The user name is LV5330. Be sure to use capital letters.
You cannot change the user name.
User: LV5330
4 Enter the password, and press Enter.
The password is LV5330. Be sure to use capital letters.
You cannot change the password.
Password: ******
5 Enter
commands.
After you enter the password, the following command prompt appears.
Enter commands while referring to section 17.3.2, “How to Enter Commands,” and
section 17.3.3, “FTP Commands.”
ftp>
17.3.2
How to Enter Commands
To transfer files through FTP, you must run a MAKE or CAPTURE command through
TELNET before you execute FTP commands.
The FTP command format is explained below. Commands can be entered using uppercase
or lowercase letters.
ftp> [Command] + [Space] + [Parameter 1] + [Space] + [Parameter 2]
