- 12 -
DISPLAY VISUALIZATIONS UPON INSTRUMENT SWITCH-ON
To turn on the instrument press ON. To turn it off press OFF for about 3 seconds: when
appears release the key.
After a blackout the instrument DOES NOT come on again automatically, you have to press ON.
To guarantee an automatic restart after a blackout, disable the ON key (see section
AFTER A
BLACKOUT
).
Upon switch-on, the display shows in sequence:
-
→
(ONLY in case of approved program);
-
instrument model (e.g.:
or
or
);
-
followed by the software code (e.g.:
);
-
program type:
(bridge);
-
followed by the software version (e.g.:
);
-
followed by the hardware code (e.g.:
);
-
serial number (e.g.:
);
PROGRAMMING OF SYSTEM PARAMETERS
From the weight display, press simultaneously keys MENU and ESC to access the parameter setting.
MENU/ENTER: to enter a menu/confirm the data entry.
: to modify the displayed figure or menu item.
: to select a new figure.
ESC: to cancel and return to the previous menu.
FILTER ON THE WEIGHT
Setting this parameter allows a stable weight display to be obtained.
To increase the effect (weight more stable) increase the value (from 0 to 9, default 4).
As seen in the diagram:
-
By confirming the
message, the currently programmed filter value is displayed.
-
By changing and confirming the value, the weight is displayed and it will be possible to
experimentally verify its stability.
-
If stability is not satisfactory, confirming brings back the message
and the filter may be
modified again until an optimum result is achieved.
+
