MED HP Batteries
–
Installation & User Guide
Installation & User Guide
HP Batteries; Medium Size
4
2.0
Introduction
Congratulations! You have purchased a state-of-the-art lithium battery and we hope you enjoy many
years of trouble-free life. This Installation and User Guide describes how to connect and safely
operate the High Power (HP) range of Medium Size batteries.
The regular (REG) models (Figure 2b) contain no internal controllers. The BIC models (Figure 2a)
contain a built-in solar controller which can take direct solar panel input, and a DC Charge controller
that controls charging current from a vehicle alternator / start battery. (The BIC-DCS model, not
covered in this user guide, contains a further DC-DC charger to regulate charging from a vehicle with
a smart alternator.)
In the context of this guide, the term High Power (HP) refers to the BMS charge and discharge
current capability. In most models the BMS allows charging at up to 150A and discharge at 200A
continuous / 500A surge.
As with all batteries, you should consider the mechanical and environmental conditions that you
intend to operate the battery in to maximise overall performance and achieve the longest battery
life. LBS offer these general guidelines; however, you should seek LBS advice or that of a qualified
electrical tradesperson if you are in doubt.
Figure 2a
LBS-*****-HP-BIC
Figure 2b
LBS-*****-HP-REG
