MED HP Batteries
–
Installation & User Guide
Installation & User Guide
HP Batteries; Medium Size
23
For example, if you only have an inverter connected directly to the terminal posts of the battery, the
display will indicate the Amps being drawn (a negative number):
If you were to have only a charger connected directly to the terminal posts of the battery, the
display will indicate the Amps being supplied (a positive number):
If you are not seeing all of the connected batteries; i.e. the number on the summary page is less than the
number of batteries in your system, do the following:
1)
Firstly, unplug the RJ12 cable from the back of the screen (or the other end of the cable at the
batteries) and plug it in again
–
this will power cycle the screen and thus rescan the battery
network, and find any batteries that were connected/turned on after the screen turned on.
2)
Perform a comms reset (page 17) on the batteries that are not found.
