MED HP Batteries
–
Installation & User Guide
Installation & User Guide
HP Batteries; Medium Size
22
If you have more than one battery connected, switching off one or more of the batteries will show
this screen page below. Turning the battery back on will remove this screen and return to the
battery level page. If you have an assortment of new and older BIC and REG batteries
and you are
not seeing all of the connected batteries
,
turn on all batteries individually (via blue power button)
before connecting the remote screen.
This
ensures that
when the screen first powers on, it finds all
batteries connected to the network:
Below is a summary page that indicates the battery charge level, the number of batteries connected
to the system, the battery voltage and the current supplied or drawn. For a single stand-alone
battery without a connected load or charger, the display reads as below:
If discharging, it shows the Amps out and the time to empty
–
a continuously flashing green LED will
be seen on the battery display (not this screen). If charging, it shows the charge current in Amps and
the time to reach full charge - a constant green LED will show on the battery display.
