LAZBOY Limited, Руководство пользователя, Страница: 22 / 60

Page 20
For HELP, call In-Touch at 866.461.3123
4. Press the Pump 1 button again. You should hear the first pump turn
on a higher speed and the icon swirl faster.
Caution: If water does not flow from the jets after 2 minutes, turn
power off at the main panel and bleed air from the
system (see page 39). Turn power on again.
Sometimes momentarily turning a pump off/on will
prime it. Only do this four times.
5. If the water is running smoothly through the lines, open the air
control valve and you should see an increase in jet pressure. Check
and adjust the water/ airflow of every jet if necessary.
Each jet in your spa can be adjusted for massage intensity and
directional flow. Turn the outer jet dial counterclockwise to increase
the water volume and clockwise to turn it off. Pivot the angle of a jet
to achieve an optimal massage.
Adding an air mixture intensifies the level of your massage. Turn the
air control valve counterclockwise to increase the air mixture and
clockwise to turn it off.
To minimize heat loss, close the air control valve when your spa is
not in use.
6. Press the Pump 1 button a third time to turn Pump 1 off. A built-in
timer automatically turns Pump 1 off after 20 minutes, unless the
pump manually has been deactivated first.
7. Press the Pump 2 button . If Pump 2 has not primed after 3
minutes repeat same priming procedure of step 3 above for Pump 1.
Check and adjust the water and airflow of every jet from Pump 2 if
necessary.
8. Press the Pump 2 button a second time to turn off Pump 2. A built-in
timer automatically turns Pump 2 off after 20 minutes, unless the
pump manually has been deactivated first.
9. Press the Light button to turn the spa Light on. Press this
button again to cycle through the five colors (red, blue, green, white,
and yellow). Once a desired color is found, pressing this button again
stays on this color.
10. Press the Light button again to turn the spa Light off. A built-in timer
automatically turns the spa Light off after two hours, unless the spa
Light manually has been deactivated first.
11. Press the Next Page button .