LAZBOY Limited, Руководство пользователя, Страница: 10 / 60

Page 8
For HELP, call In-Touch at 866.461.3123
L o c a t i o n a n d I n s t a l l a t i o n
Proper planning is an important consideration when installing your new
spa. Site selection is a critical step and requires serious thought.
Planning ahead makes the installation process easier. The following
information is provided to assist you in site preparations.
1) Always comply with local building codes and obtain any necessary
permits. You may also need to consult with an engineer to address
your specific design needs.
2) Contact an electrician to assess your electrical needs, install wiring,
and assure a safe operation.
3) Position your spa with proper access to water, drainage, and
electricity.
4) Place your spa on a uniform solid, flat surface designed to properly
support its weight. For external installations, a 4-inch (10 cm) thick
cement pad suffices.
5) For internal installations, check the load carrying capabilities of the
floor on which the spa will reside. Most homes meet the requirement
of 80 pounds per square foot.
6) Assure that your spa will fit into the space you have chosen and the
delivery route will accommodate its large size.
7) Provide adequate ventilation for the humidity created by your spa. In
most cases, a Spa Hard Cover is sufficient.
8) Protect the pump and all equipment from the weather by ensuring
the cabinet panels are secure at all times.
9) Allow 36 inches (1 meter) of unobstructed access to all sides of your
spa for normal servicing. Your spa is not designed to be recessed in
the ground or in a deck.
Hot Tub
36 inch
(1 m)
clearance
4 inch (10 cm)
Concrete slab
Figure 1 – Clearances and Support