LawnMaster PB Series, Инструкция по безопасности и эксплуатации

Страница: 17 / 34

17
A STEELFORT PRODUCT | STEELFORT.CO.NZ
and may require more than 3 startup attempts. In
this case it would be necessary for an operator to
manually start with a key. We recommend installing
the equipment protected from intense cold to avoid
start up failures due to temperature.
NOTE: LawnMaster is not responsible in any way for
damages caused to products or equipment that may
arise from the lack of supply by a generator failure.
DANGER
This equipment is not designed to protect vital
equipment such as (life support equipment, extreme
safety equipment or other equipment that involves a
risk to persons or property in cases of lack of supply.
STEP 4.
Programming The Automatic Mode
The battery is extremely important for starting up in
automatic mode, before programming the equipment
check the battery is correct and that it is charged.
1 . Place the fuel valve switch to “ON” position.
2.Place the engine ignition key to “ON” position.
3. Push “SIGNAL MODE” switch to “ON” (auto mode).
The generator is ready for start by remote signal
when inverter/charger joins the 2-signal contacts.
After connect generator definitively with the inverter/
charger you can simulate a start/stop maneuver.
Join the signal contact and keep them connected,
generator will start the startup process according
point 9.3 of this manual.
After 5 minutes running you can separate the signal
contact, the generator stops and keep waiting for
next order.