LawnMaster PB Series, Инструкция по безопасности и эксплуатации

Страница: 12 / 34

12
A STEELFORT PRODUCT | STEELFORT.CO.NZ
MODE BUTTON is used for reset (operate cautiously
when necessary).
A. VOLTAGE (U):
Output Voltage of the generator.
B. FREQUENCY (F)
Output frequency in hertz
C. RUN TIME (R):
Run time of the generator for the current session.
NOTE: If display value is less than 100, the numeric
display will accurate to one decimal place. If the
operation time is 100 hour or greater, the display will
be “101”,”102” and so on.
D. TOTAL RUN TIME:
Total run time of the generator since first operation
(display mode depends on the configuration).
1) The display value is accurate to one decimal
place; or
2) The display value shows as a integer.
8. CONNECT ELECTRICAL DEVICES
Inspect power cord for damage before using. There
is a hazard of electrical shock from crushing, cutting
or heat damage.