19
GENERAL TROUBLESHOOTING
■ Press the start button to check if the spark plug sparks. If not, check the gap between the rotor and
the ignition coil following below steps.
■ Rotate the socket wrench counter-clockwise to remove the 5 screws on the rear engine cover. Then
remove the rear engine cover (Fig. 6).
■ Rotate the socket wrench counter-clockwise to remove the 4 screws on the connection cover. Then
remove the connection cover (Fig. 7).
■ Use the socket wrench to hold against the flywheel from the back side as shown (Fig. 8). Rotate the
quincunx wrench counter-clockwise to remove the clutch cover assembly (Fig. 9 & 10).
Fig. 9
Fig. 8
Fig. 7
Fig. 6
Fig. 10
5
1
2
3
4
1
2
3
4
Clutch Cover Assembly
Clutch Cover Assembly
Rear Engine
Cover
Connection Cover
