LawnMaster LGBQH6200, Инструкция по безопасности и эксплуатации

Страница: 19 / 26

19
A STEELFORT PRODUCT
5. Inspect the spark plug and spark plug
washer, if it’s damaged or worn, replace with
new one. Clean the spark plug with wire brush if
reuse it.
6. Check spark plug gap. Carefully bend side
electrode to adjust the gap if necessary.
SPARK PLUG GAP: 0.6MM - 0.8MM
7. Carefully thread the plug into the engine by
hand.
8. After the spark plug is in position, use spark
plug wrench to tighten the plug.
SPARK PLUG TIGHTEN TORQUE: 20-25 N.M
9. Attach the spark cap to the plug and connect
the spark plug wire to the plug.
WARNING
Only use the recommended spark plug or equivalent.
DO NOT use spark plugs that have improper heat
range.
10. Install spark plug maintenance cover.
SPARK KILLER
(IF APPLICABLE)
1. Allow the generating set to cool completely
before servicing the spark arrester.
2. Remove the muffler blind window first.
3. Remove the spark arrester screen.
4. Carefully remove the carbon deposits from the
spark arrester screen with a wire brush.
5. Replace the spark arrester if it is damaged.
6. Reinstall the spark arrester in the muffler and
reinstall the muffler blind window.
SPEED
The speed has been pre-set at the factory and should
rarely require readjustment. Consult your local Lawn-
Master dealer for such needs.
WARNING
Unapproved adjustment will damage your engine
and/or your electrical devices and void your war-
ranty.
ADJUSTMENT
There has no other service and/or adjustment need
for your generator. Unapproved adjustments or
tampering can damage your generator and your elec-
trical devices and will void your warranty. Contact
your local LawnMaster dealer for such needs.
WARNING
Tampering with the factory set governor will damage
your generator and void your warranty.