background image

12

A STEELFORT PRODUCT 

3. Select according to the actual configuration      

    of the user

RECOIL START

To start the generator, hold the handle of the 

recoil starter and pull it slowly until there is 

resistance and then quickly pull the handle to 

start the generator.

WARNING: 

Please check the condition of the starter rope 

before use. If the rope is seriously worn, please 

replace it at the authorized local dealer in time.

WARNING - RECOIL 

When the recoil starter retracts quickly after 

start-up, the hand and arm will be pulled toward 

the engine faster. 

Unpreparedness may result in accidental injury.

CAUTION

During start-up, the choke may be affected by 

temperature or other factors and may require 

different openings.

ELECTRIC START {IF CONFIGURED) 

Press and hold the start button for 0.3-5 s 

and then release it, and the generator will 

be started, and the start button will be reset 

automatically. 

WARNING

When the generator cannot be started through 

electric start due to low battery power, which 

is caused by generator idling for a long time or 

in improper use, please manually control the 

damper and start the generator according to 

the steps for recoil start, The generator will 

automatically charge the battery after normal 

operation.

PUSH BUTTON (IF CONFIGURED) 

Push the button once to start the generator

CAUTION

After the generator is used for a period of time, 

if the push speed of the motor decreases, it 

means that the battery needs to be replaced. 

Before shutting down the generator, ensure 

that the combination switch in “Flameout” 

position, to prevent battery power loss, which 

may affect the next start.

If the generator still fails to be started or is shut 

down after three attempts, find the cause of 

the fault and eliminate it.

The engine oil alarm prevents the generator 

from being started when the oil level in the 

crankcase is below the lower limit.

Содержание LGBQH6200



























Отзывы: