lavina L25LM-S-E, Руководство пользователя

Страница: 2 / 31

Superabrasive User Manual Original Language Lavina® 25LM ‐ S ‐ E 12/2014
2
1. GENERAL INFORMATION
Manufacturer 3
General Description 3
Machine Characteristics 3
Main Design 3
Environmental Conditions 3
Electrical Connection 4
Vacuum Connection 4
Technical Data 4
Vibrations 4
Sonorous Emissions 4
Label Data 4
Customer Service 4
2. SAFETY INSTRUCTIONS
Recommended Use 4
Prohibited Use 4
Preparation for Work 5
Protection Devices 5
Arrest Functions 5
Safe Use 5
Residual Risks 5
Before You Begin 5
Operating the Machine 5
After Work is Completed 5
The Work Area 5
Personal Protective Equipment (Ppe) 5
Operator 5
3. HANDLING AND TRANSPORTATION
Preparing the Machine for Transportation 6
Lift the Machine from Working to Tool Mounting
Position 6
Lifting 6
Adjusting the Handle 6
Storage 6
4. OPERATION
Preliminary Controls 7
Water Flow Control Unit 7
Adjusting and Mounting Tools 7
Frame Blocking (U ‐ Joint) 7
Control Board 8
Starting the Machine 8
Operating the Machine 8
Stopping the Machine 8
Alarm 8
5. TOOLS AND ACCESSORIES
Weights 9
Tool Holder Key 9
Foam Plate 9
Security Plate for Quickchange Pads 9
6. POPULAR TOOLS
10
7. EXPLODED VIEW
General Exploded View (Fig.7.1) 11
Top Cover Exploded View 1 (Fig.7.2) 11
Planetary Drive Exploded View (Fig.7.3) 11
Top Cover Exploded View 2 (Fig.7.4) 11
Bottom Cover Exploded View 1 (Fig.7.5) 12
Bottom Cover Exploded View 2 (Fig.7.6) 12
Pulley Units Exploded View (Fig.7.7) 12
Carriage Exploded View (Fig.7.8) 12
Tool Holder Exploded View (Fig.7.9) 12
8. MAINTENANCE AND INSPECTION
Cleaning 13
Check Daily 13
Check And Replace After The First 15 Working Hours 13
Check Every 200 Working Hours 13
Check Every 400 Working Hours 13
Vacuum 13
Water Leaks 13
Mechanical Parts 13
Electrical System 13
Electrical Schemes 14
9. TROUBLESHOOTING
Index of Problems and Solutions
9.1 Replacing Power Cord and Plugs 15
9.2 Dismounting and Mounting Tool Holder to change buffers
and spiders, changing V ‐ Rings and Felt ‐ Rings 15
9.3 Tensioning and Replace the Planetary Belt 16
9.4 Tensioning Used Planetary Belt 16
9.5 Mounting and Tensioning a new Planetary Belt 16
9.6 Checking the Tension of the Belt 17
9.7 Replacing of the Pulley Units 18
9.8 Mounting the Belt 19
9.9 Motor Connection 19
9.9 Fault Diagnosis Inverter YASKAWA V1000 20
10. WARRANTY AND RETURNS
Warranty 23
Return Policy 23
11. DISPOSAL
23
12. MANUFACTURER’S CONTACTS
23
13. SPARE PARTS
13.1 General Parts
/
for machines produced before Jan.1 2014/ 24
13.1 General Parts
/
for machines produced after Jan.1 2014/ 24
13.2 Top Cover Parts 1
/
for machines produced before
Jan.1 2014/ 25
13.2 Top Cover Parts 1
/
for machines produced after Jan.1 2014/ 25
13.3 Top Cover Parts 2 26
13.4 Planetary Drive Parts 26
13.5 Guard Parts 26
13.6 Bottom Cover Parts 1 27
13.7 Bottom Cover Parts 2 27
13.8 Pulley Units Parts 28
13.8a. Pulley Unit Assembly 28
13.8b. Driving Pulley Unit 28
13.9 Water Supply Parts
/
for machines produced before
Jan.1 2014/ 28
13.9 Water Supply Parts
/
for machines produced after
Jan.1 2014/ 28
13. 10 Tool Holder Parts 29
13.11 Carriage Parts
/
for machines produced before
Jan.1 2014/ 29
13.11 Carriage Parts
/
for machines produced after Jan.1 2014/ 30
13.12 Control Box Parts 380Volt 31