Laversab ARTS 7000, Руководство пользователя

Страница: 87 / 194

ARTS 7000 User Manual Aviation Systems
Rev A6 Page 87
COM FM Test Controls and Selections
Item Description
Sets Frequency of the ARTS 7000 Generated COM FM
signal.
During the active test operation fine adjust is available
see below.
Sets the output power of the ARTS 7000 generated COM
FM signal.
Not shown in Rx mode.
During the active test operation fine adjust is available
see below.
Sets the Frequency Deviation of the COM FM signal.
Not shown in Rx mode.
Selects the Audio Identification transmission from the
ARTS 7000.
Not shown in Rx mode.
Options are: Off , Tone (1KHz steady tone) or Code
(Morse - LSB).
When Code is selected the repetition rate is set at 30
seconds. The user can trigger an immediate Code
transmission by pressing the code button. Whenever the
Code button is pushed the ARTS will immediately
transmit the Code signal.
Toggles the ARTS 7000 from Receive to Transmit mode.
On Start up the ARTS 7000 is always in Receive mode.
Press this button for Transmit or Receive.
During an active test this field will indicate the
Transmitted Frequency from the Aircraft.
During an active test this field will indicate the
approximate transmitted Audio Frequency from the
Aircraft.
Diagnostic tools for Frequency and Power checks. Only
Active in RX mode See below for details.