Laversab ARTS 7000, Руководство пользователя, Страница: 8 / 194

ARTS 7000 User Manual Aviation Systems
Rev A6 Page 8
N
OTES ON THIS DOCUMENT
This document is intended to be a guide to the normal operation of the ARTS 7000 Test System.
This manual will explain the technical specifications, features and functions of the ARTS 7000. It
has been written as a user reference for the test set operator. It does not detail any specific test
procedure or process for any aircraft or aircraft system. Every aircraft and aircraft system will
require a specific test procedure. It is highly recommended that this manual is used in conjunction
with the relevant aircraft or system maintenance manual that is to be tested using the ARTS 7000
Test System.
Please Note:
Throughout the manual there are warnings that are identified in Red as shown in an example
below:
WARNING
It is extremely dangerous to generate signals during testing that are on the frequencies that are
in use by local ATC. When operating the Test Set in a Navigation Mode (VOR, ILS, Mkr).
Please be aware of the local navigation aid and ATC frequencies. It is the test set operator’s
responsibility to make sure all testing is carried out on Frequencies that will not interfere with
local navigation aids or ATC resources.
This document also identifies some Hints and Tips to enhance and improve the operators
testing experience and success. These Hints and Tips are identified throughout the document
in
Green text. For an example see below:
Hints and Tips
When testing any Transponder, DME or TCAS, make sure the reflective paths are minimized
from equipment that is in close proximity to the aircraft. Try to select a line of site between the
test Set antenna and the Aircraft antenna that does not have any obstruction in front or behind
the antenna being tested. For example: Ground Power Units, Aircraft Landing Gear, Aircraft
Stairs, Toolboxes etc.