Laversab ARTS 7000, Руководство пользователя

Страница: 58 / 194

ARTS 7000 User Manual Aviation Systems
Rev A6 Page 58
Selects the Audio Identification transmission from the
ARTS 7000.
Options are:
Off , Tone (1KHz steady tone) or Code
(Morse - LSB).
When Code is selected the repetition rate is set at 30
seconds. The user can trigger an immediate Code
transmission by pressing the code button. whenever the
Code button is pushed the ARTS will immediately
transmit the Code signal.
LOC Phase adjusts the phase relationship between the
90 & 150Hz tones.
Selects the removal of the 90Hz, 150Hz, or both 90Hz
and 150Hz elements of the Localizer.
Used to confirm receiver fail indication on loss of a valid
signal element.
Selects either Fixed or Variable Deviation step of the
Localizer.
GS Phase adjusts the phase relationship between the 90
& 150Hz tones.
Selects a menu to allow the removal the 90Hz, 150Hz, or
both 90Hz and 150Hz elements of the Glide Slope.
Used to confirm receiver fail indication on loss of a valid
signal element.
Selects either Fixed or Variable Deviation step of the
Glide Slope.
Steps the Localizer 1 Step to the Left. Each step size is
selected from the Config Page.
Steps the Localizer 1 Step to the Right. Each step size is
selected from the Config Page.
Sets the ILS Signal (both Localizer and Glide Slope
Signals) to the Center position.
Steps the Glide Slope 1 Step up. Each step size is
selected from the Config Page.