“E
SPRESSO
P
OINT MOD
. M
ATINÈE
” 120 V
C
OD
. 83312 / R
EL
. 1.00 / F
EBRUARY
2003
1
4/6
General information
1.5
Environmental conditions allowed
To guarantee the correct operation the "Espresso Point" machine must be
positioned out of the atmospheric agents (rain, hail, snow, fog, dust in suspension
etc.) with an environmental temperature of exercise between 0°C and 32°C and
with relative damp not superior at 70 %.
The working environment must be clean, sufficiently bright and in absence of
explosive or corrosive atmosphere.
1.6
Warehousing
Storing the "Espresso Point" machine in a place sheltered from atmospheric agents
with temperatures between 0°C and 40°C, possibly the inside the original packing
or, if impossible, protecting it with nylon sheets to avoid the accumulation of dust.
1.7
Scrapping
The scrapping happens at the end of the working cycle of the machine. In normal
conditions of use and maintenance it has duration of over ten years.
In case of scrapping all the components will be disposed in adequate dumps
following the legislation in force. Before proceeding to the scrapping it is necessary
isolate its different parts (plastics or rubber, electric, electronic material, etc.).
The parts constituted entirely by plastic material, aluminium, steel, can be recycled if
collected by right centres.
1.8
Transport
The charge and discharge operations and in general the moving of the “Espresso
Point” machine must be done with extreme care. For the occasional shifts use the
original packing, excellent to contain and protect the apparatus’ case.
