“E
SPRESSO
P
OINT MOD
. M
ATINÈE
” 120 V
C
OD
. 83312 / R
EL
. 1.00 / F
EBRUARY
2003
4
5/7
In the event of faults
The pod enters with
difficulty or it doesn’t enter at
all.
When inserting the pod,
everything runs correctly.
The coffee is burnt.
The feed pilot light does not
flash.
When inserting the pod,
everything runs correctly.
The coffee is burnt.
The feed pilot light flashes.
• The pod drawer is full,
the pods are blocked
along the discharge pipe
preventing their regular
emission.
1
Extract the drawer and
empty it.
2
Remove the used pods in
excess dropped inside.
The FAP press remains lowered
• The solenoid valve fails to
discharge.
• The stainless steel spring in
the chamber is broken.
1
Replace the faulty solenoid
valve.
2
Replace the spring.
• The jaws are blocked by
coffee powder.
1
Dismantle the output unit
and clean the jaws slide
base.
1
Replace both the
thermostats.
• The 100 °C thermostat and
both the thermostats are
faulty, and remain closed.
The machine temperature
rises until the safety
thermofuses come into
operation.
1
Replace the thermostat.
• The 100 °C thermostat is
faulty. The safety thermostat
has come into operation.
• The discharge pipe is
choked, the FAP press
remains lowered.
1
Check the pipe condition
and replace if necessary.
