LAUNCH X-712 Wheel Aligner Operation Instructions
4-9
Fig.4.24). Put up the vehicle with the special tools
equipped according to the prompts on the screen.
Click [NEXT] button, the screen will display the
interface as shown in Fig.4.28.
Fig.4.28
4.
Put up the vehicle (to position B2) according to the
requirements of the manufacturer. The screen
display the interface as shown in Fig.4.29:
Fig.4.29
5.
Put down the vehicle to position B1. Adjust the
vehicle front toe-in to the allowed scope according
to the standard specifications. The interface is as
shown in Fig.4.30:
Fig.4.30
6.
Put down the vehicle, and then click
button to return to the interface of [Front Axle
Measurement].
Attention: After adjustment, please remember to click
button, and then put down the vehicle body
according to the prompts on the screen. If the lift is not
put down, it will be limited to select the other interfaces
(except for [Rear axle measurement] interface) as
shown in Fig.4.31.
Fig.4.31
Print Report
Print Report can print and save the alignment data of the
vehicle under test. The interface is as shown in Fig.4.32.
Fig.4.32
[Vehicle license plate number]: The license plate number
of the vehicle under test.
[Client information]: The corresponding information for
the owner of the vehicle under test, including [Client
name], [Contact], [Telephone] and [Address]. The client
information can be directly entered in this interface with
the keyboard.
[Vehicle information]: The corresponding information of
the vehicle under test, including [Mileage],
[Manufacturer], [Model], [Start year] and [End year]. The
vehicle information cannot be directly entered in this
interface with the keyboard. If the vehicle model has
been selected in [Measurement] – [Select vehicle model],
the corresponding information of the vehicle model
selected will be displayed in this interface.
[Operator]: Name of the operator who is operating the
Print/ Save
Return to caster swing
Vehicle license plate
number
Client information
Fault cause
Содержание X-712
Страница 1: ...V2 01 000 2012 09 10 For X 712 X 712 Short Column X 712 Wall mounted X 712HD...
Страница 13: ...LAUNCH X 712 Wheel Aligner Structures 2 2 Fig 2 1 b X 712 Short Column Wheel Aligner...
Страница 14: ...LAUNCH X 712 Wheel Aligner Structures 2 3 Fig 2 1 c X 712 Wall mounted Wheel Aligner...
Страница 15: ...LAUNCH X 712 Wheel Aligner Structures 2 4 Fig 2 1 d X 712HD Wheel Aligner...