Launch X-712, Руководство пользователя

Страница: 19 / 37

LAUNCH X-712 Wheel Aligner Operation Instructions
4-2
Fig.4.4
[Next]: To perform the test according to the default
sequence (Select vehicle model
→
Vehicle-pushing
compensation
→
Caster swing
→
Rear axle
→
Front axle
→
Print report ) of the system.
[Navigation column]: To enter into the item you want to
test in spite of the default sequence.
[Commonly used data list]: The vehicle model in the list
can be directly selected to perform the next-step
operation. It is blank when firstly used. Only the vehicle
model data must be added into this list from the
standard database, can the list be used (See [System
Management] - [Commonly used data management]).
[Selected from standard data]: If there is no the
vehicle model you want, you can directly search for the
vehicle model you want from the standard database,
and directly perform the next-step operation(This vehicle
model is no longer saved in the commonly used data
list). If you want to add this vehicle model into the
commonly used data list, it needs to be added from the
interface of [System Management] - [Standard Data
Management]).
[Selected from customer information]
For old customer, you can directly search for the vehicle
model from the customer information database, and
directly perform the next-step operation.
[Quick search]: The input box for quick search aiming at
the vehicle model is provided at the bottom of the
interface. Please input the first letter of the vehicle
model to perform the searching operation.
[Tire parameter]: When the unit of toe-in is used in mm
or In (The unit of toe-in can be set in [System
Management] – [System setting]), the diameter or model
of the present tire must be input.
[Help]: To provide the description of operating method
and note.
Operating procedures:
Select the corresponding vehicle model item in
[Commonly used data list], then click [Next].
Note:
1. When the toe of the system uses linear
measure, it is required to enter the vehicle
tire diameter at the right bottom corner on
this interface, otherwise the system cannot
enter the next operating procedure
2. The form currently provided is the same form
with Commonly Used Data Management in
the System Management interface, in the
same way, you can click button to add
the standard data provided by the system
into this form. If you want to add user-defined
data, you need to add it from Standard Data
Management interface of System
Management. The unit of Wheelbase, Front
wheelbase and Rear wheelbase is mm.
Special Measurement:
For different data of vehicle model, some special
measurement methods and operating procedures will
occur:
1.
Aiming at some vehicle model of Benz, the system
provides the operations for measuring the standard
data with gradient meter. When the data selected is
of Benz vehicle, the system will pop up a dialogue
box as shown in Fig.4.5.
Fig.4.5
The interface for vehicle level measurement is displayed
in Fig.4.6.
Navigation column
Commonly used data list
Quick search
Added from
standard data
Help
Tire parameter
Next
Selected from
customer information