![background image](http://html1.mh-extra.com/html/launch/value-601a/value-601a_use-and-instruction-manual_3915341016.webp)
WORKING
CYCLE
VACUUM TEST: press ENTER to change the
test settings, ENTER to start the cycle (the
test is also included in the VACUUM cycle).
OIL INJECTION
: press ENTER to select
the oil charging settings UP/DOWN but-
tons to adjust the quantity. ENTER to
perform the oil charge, EXIT to esc.
To adjust the quantity of the oil to be charged
use UP/DOWN buttons. By decreasing below
0, you select the SA (semi-automatic) mode.
NOTE: if the oil charging icon is on OFF mode
please go on OPTIONS –> SET OIL REFILL and
set oil refill mode to ON
DYE INJECTION
: press
ENTER
to select
the dye quantity,
ENTER
again to start the
cycle.
NOTE
: the oil or dye injection must
be preceded by a vacuum cycle and
followed by a gas
recharging cycle.
FLUID REFILL: press ENTER to change the
settings, ENTER to start the gas charging
NOTE: the charging must be preceeded by a
vacuum (which includes a tank heating
phase)
The unit asks you to confirm the A/C type:
Hybrid/Elec. (electric Compressor)
Standard (belt driven compressor)
16
www.diagtools.eu, [email protected], Pernavas 43A, Riga, Latvia, LV-1009, +37129416069