Launch TWC-512RMB, Руководство по эксплуатации

Страница: 9 / 18

9.5 use a hand control valve to
raise up the hook, the bead lip
is the top of rim’s edge.
9.6 some tires such as run-
flat ,or low profile tires
needs extra force to reduce
stresses. Use the assistance
arm to press down on the
tire opposite the mounting
head to allow the bead to
utilize the drop center area
of the rim, this position re-
duce stresses in the bead and
allows an easier bead lift.
9.7 lubricate bead lip area
before rotate the wheel.
Lubricating the bead can
decrease the friction be-
tween hook, bead and rim.
It must be lubricated well.
9.8 during the demount,
bead lip maybe not jump
up the top of rim, please
use plastic bead lifting
lever to insert the gap be-
tween bead and rim. Hold
that position (see left pic-
ture) to keep bead is top of
the rim.
9.9 rotate the tire. Then
top bead lip is completed
loose.
9.10 use the hand control
valve to push down the
hook (lift picture).
9.11 use the hook to pull
out the bottom bead lip.
9.12 lubricate the hook
and bottom bead lip to
decrease frication during
the demounting.
9.13 lubricate the vertical
sleeve if bead is wider.
9.14 rotate the wheel to
demount the bottom bead
lip.