Launch TWC-512RMB, Руководство по эксплуатации

Страница: 8 / 18

4.Place tire/wheel assembly on table top with mount-
ing side up
5. use the clamp control pedal to move the clamps in-
ward or outward.
6. apply tire manufacturer’s approved rubber lubri-
cant liberally to entire circumference of both beads
after loosening bead and placing on table top. Using
the mount/ demount roller to hold down the top bead
while rotating the turntable will make lubrication
easier.
7. move the tower forward by depressing the tower tilt pedal
then press the control button to unlock the horizontal slide.
Pull the mount/demount head forward.
(9) How to demount and mount a tire
with using ULMH
9.1 before demount, make sure the bead is loose. Please
use the bead breaker to loose the bead. Then lubricate the
bead where hook push down.
9.2 if machine equips assis-
tance arm, press down the
bead to show the bead lip
and gap. Then use the hand
control valve push down
the hook. (left picture). Re-
turn assistance arm.
9.3 the hook maybe not
under the bead lip be-
cause the bead is thick or
long. Please step on the
rotation pedal to counter
clockwise spin the tire.
9.4 during the rotation,
the tension of bead will
be bounced, so the hook
automatically is under
the bead lips.