Launch TWC-512RMB, Руководство по эксплуатации

Страница: 16 / 18

5. LAYOUT OF FUNCTIONAL PARTS
Right picture shows functional members of the DAAR ARM
1. valve Control Unit
2. axle guideboard
3. back swing arm
4. axle guard cover
5. shaft
6. bead roller
7. cylinder
8. bead breaker handle
9. u shape arm
10. mounting block
11. disk handle
12. bead breaker disk
1
1
2
1
4
1
5
1
6
1
7
1
8
1
9
1
10
11
12
3
1
6. SPECIFECATION OF SWITCH LEVEL
Controlling the switch level could attain the rise or decline of the tool holding arms.
7. TRIAL OPERATION
The operations of the DAAR Arm need the power both of electricity and compressed air.
The DAAR Arm must connect with air compressor
，
and 8 bar air pressure is desirable.
8. SAFETY REGULATIONS
WARNING:
Unreadable or missing warning labels must be replaced immediately.
Operations are not permitted when one or more labels are missed.
It is not allowed to prevent the view of the operator to see the labels when running the machine.
It’s reasonable to set up some labels as right picture shows.
!
9. OPERATIONS
The DAAR ARM has been designed to facilitate the operations of wheel locking and mounting/demounting
the tire on or from the rim. These operations
，
especially with low profile or very wide sports car tires or with
very hard beads
，
can be very difficult. In any case
，
the DAAR ARM would make these jobs easier on any
type of wheel.