Launch TWC-512RMB, Руководство по эксплуатации

Страница: 10 / 18

(11) bead installation
(10) Mounting
Notice: check the wheel and bead any possible dam-
age that maybe cause rick
11.1 first install bottom bead tip on the rim.
11.2 rotate the wheel and bottom bead will automatic pull
down. Depress table top pedal and rotate wheel to mount
lower bead. Use drop center of wheel by forcing down on
tire just ahead of the mounting tool, and follow as tire ro-
tates. Rotate table top until lower bead is mounted.
11.3 the top bead lip must place on the ULMH tail. ro-
tate the table top until the valve stem is directly across
from the mount head. Lift the upper bead up and over
the rear of the mount head. With assistance arm press
down on the tire between the mount head and the valve
stem to hold the tire in the drop center. Depress table
top pedal and rotate tire until bead is mounted. Be care-
ful to ensure bead stays in the rim drop center in the
area ahead of Mounting head
11.4 If table top rotation stalls, reverse the table top mo-
mentarily until tire bead is again loose on the wheel. Repo-
sition tire on Mounting head, make sure bead is correctly
positioned in drop center of the wheel; then attempt
mounting again.
11.5 For low profile or stiff sidewall tires, it may be advan-
tageous to use the bead lifting tool to initially hold the up-
per bead down in the drop center.