![background image](http://html1.mh-extra.com/html/launch/cch201/cch201_user-manual_3854031008.webp)
SPRAY BOOTH USER MANUAL
- 6 -
Fig. 2.6
-
Basement, made of front panel,back panel,side panel,middle supportor and strengthen bar placed
longitudinally and connected together. The pieces composing the basement are made of zinced
pressure folded plates.
-
Floor filter supported frame and panel placed under the filter,the side rows and middle row with the
panel for keeping air off when all rows grids as optional. And the No 2 and No.4 rows with the
supported frame for air ventination.
-
Floor filter,is necessary for painting filtration.Usuallly cover row of No.2 and No.4 with the floor
filter.And cover all five rows with floor filter when all grids as optional.
-
Grids, that are inserted in the basement necessary for the flooring. There are five rows in total,Row 2
and Row Four should be the grids,and Row 1,Row 3 and Row 5 should be vein boards. but row No.2
and No.4 in the area in which the air is aspired the grids are only used, in order to allow the air to
pass.
2.1.2 Generator Part
The generator unit is necessary to start the forced ventilation needed for an optimal aerification and a
homogeneous distribution of the paint to produce the quantity of heat necessary for the drying process.All
the components of the generator unit are to be found in a closed booth . And the spray painting booth
consisting of (shown in Fig.2.7)