![background image](http://html1.mh-extra.com/html/launch/cch201/cch201_user-manual_3854031027.webp)
SPRAY BOOTH USER MANUAL
- 25 -
3. 3.6 Control System Installation
1.Control damper installation
The damper is exchanger between painting and baking system.the installation and test shown in Fig.3.21.
Connect the air pile according to the following pictures,and the air compressor should be prepared by the user.The
pressure should be setted to 0.4~0.6Mpa as the pressure meter.Take the screw up and turn to adjust.
Fig.3.21
ATTENTION:
There is a vane inside the damper shown in Fig.3.22.When the
vane in the position A,that is the painting system,and when the vane in the
position B,that is the baking system.You can test it when you operate it.If you
find the wrong position,change the air pipe Port C and Port D shown in Fig.3.23.That is ok.
Fig. 3.22 Fig.3.23
2. Burner installation
1)Install the burner to the connection mounth of the heat-exchanger,then fix it with bolts shown in Fig.3.24