12
Multifunction display
1.
Tachometer
2.
Speedometer
3.
Multifunction display
4.
Fuel gauge
The main display includes a tachometer and fuel gauge, as
well as a speedometer on the digital main display.
The tachometer is shown in the top left side as an arched
column.
Fuel level is indicated with a seven-segment arched column.
The last bar will blink when the fuel level is low.
There is also a secondary, digital multifunction display below
the main display that can be set using the MODE and RESET
buttons:
Press the MODE button to show all the functions in sequence.
1.
RPM: Digital tachometer.
The tachometer can be set to issue an alert at a
predetermined rotational speed. While the engine is
running, turn the throttle until the desired maximum
rotational speed is shown. Now press the RESET button.
The tachometer’s bar chart will now blink once the RPM
meet this value.
This will continue to blink until you shift to a higher
gear or reduce the RPM.
RESET
MODE
0
2
4
6
8
10
12
FULL
1
2
3
4
Instrument Rev-C
Indicator light
Indicator
High beam
Not used.
Neutral indicator
Low oil pressure
Figure 9
RESET
MODE
0
2
4
6
8
10
12
FULL
Fig08
