Lauda VF 20040 C, Руководство по эксплуатации

Страница: 9 / 42

V1 Versafreeze Chest Freezers 9 / 42
Before the appliance is moved to its place of installation, the electrical system (see point 5 of these instructions) and,
if necessary, the alarm system (see point 8.5) must be connected. Ensure that the connection cable is not damaged when
the freezer appliance is moved.
Caution! Due to the nature and quantity of the refrigerants used, naked flames are prohibited within a ra-
dius of 1 m of the appliance.
5 Operating voltage and electrical connection
A marked equipotential bonding connection is located at the back of the chest freezer. Local regulations may stipulate the
need to connect the appliance to a grounding network for equipotential bonding. Please check before commissioning the
appliance.
The operating voltage and the mains frequency on the type plate (right side wall, top left) must
match the power supply specifications.
The main switch on the refrigeration system must switched off (position 0). Once these conditions
have been met, establish the electrical connection.
The refrigeration system may only be operated on a correctly installed power connection with a protective
earth conductor (PE) that complies with local regulations.
It must be possible to disconnect all poles of the power supply from the power network
(e.g. via an earthed socket or switch).
6 Commissioning
Caution:
due to the low temperatures in the refrigeration compartment, suitable protective gloves must always be
worn when storing and retrieving refrigerated goods. Arms must also be covered.
Caution:
Do not leave the chest freezer keys near the appliance or within the reach of children.
Do not store acids or alkaline solutions that can erode the materials, hazardous substances that emit
harmful vapors, or highly flammable and/or explosive substances inside the appliance
(DGUV Information 213-850).
Read and observe the operating instructions.
Off
On