2
ECP5-5G Versa Development Board
Introduction
The ECP5-5G™ Versa Development Board allows designers to investigate and experiment with the features of the
ECP5-5G Field-Programmable Gate Array. The features of the ECP5-5G Versa Development Board can assist
engineers with rapid prototyping and testing of their specific designs. The ECP5-5G Versa Development Board is
part of the ECP5-5G Versa Development Kit. The guide is intended to be referenced in conjunction with demo user
guides to demonstrate the ECP5-5G FPGA.
Figure 1. ECP5-5G Versa Development Board, Top Side
USB Programming
JTAG
Interface
PCI Express x1
On-Board
Clock
Management
12 V DC
Power Input
Expansion Connectors
DDR3
Memory
SERDES Test
SMA Connectors
LED
Display
Push-buttons
User
Switches
Status LEDs
SPI Flash
Configuration
Memory
Configuration
Mode Switches
ECP5-5G
Device
JTAG Chain
Selector
Dual RJ45
Ethernet Ports
Dual RJ45
Ethernet Ports
Features
• Half-length PCI Express form-factor
— Allows demonstration of PCI Express x1 interconnection
• Electrical testing of one full-duplex SERDES channel via SMA connections
• USB-B connection for UART and device programming
• Two RJ45 interfaces to 10/100/1000 Ethernet to RGMII
• On-board Boot Flash
— 128M Serial SPI Flash
• DDR3-1866 memory components (64Mb/x16)
• Expansion mezzanine interconnection for prototyping
• 14-segment alpha-numeric display
• Switches, LEDs and displays for demo purposes
• Diamond
®
programming support
• On-board reference clock sources
