Laski Predator, Руководство по эксплуатации

Страница: 9 / 59

Predátor P 56RX
9
- The stump cutter is allowed to be transported to site either on a trailer or on a
low-bed truck. It is not designed to go on public roads.
- While working, wear always personal protective equipment – forestry safety
helmet with visor or goggles, protective gloves, steel toe protection boots and
working clothes properly buttoned. DO NOT wear rings, bracelets, watches,
jewellery or any other items that could be caught in the machine controls.
Always wear full protective clothing and full ear protection according to noise
level. Wear a dust mask if the ground is very dry.
- Every operator of this machine is fully responsible for any injury or damage
caused to the third persons within the operating reach of the machine.
- While working, the operator should stand at least 3 m away from the cutting
head.
- Keep this machine beyond children's and unauthorised persons' reach. Avoid
their presence while working.
- Observe the working area. If any person, children or animals approach while
cutting (within a 20 metre radius of the machine), then stop working
immediately.
- Take the time to familiarise yourself with the machine controls before
attempting to operate it and slowly build up to operating the machine at its full
capability.
- Before working learn all functions of individual controls and safety elements
and carry out functional checks before any use.
- Make sure if necessary operating and ancillary space is free and safe.
- At work in residential zones use the machine in accordance with regulations of
the local authorities to avoid disturbing of local inhabitants (noise, flying chips,
exhaust gases). Engine exhaust gases contain poisonous carbon monoxide.
- While working keep an eye on chips gathering behind the cutting head. In case
of excessive accumulation, stop the engine and wait for running the head out.
When the head stops, remove excessive chips.
- This manual describes problems and faults that may occur at work and that could
be remedied by an instructed person. In case of other problems and faults do not
hesitate and contact the manufacturer. He is always ready to help you.
- Do never any technical changes or any actions that are neither given in this
manual nor allowed by the manufacturer. This machine, if not correctly installed
or adjusted, may run without problems now but in the future any of important
parts could get out of order or do fatal damage.
- For replacement of worn or damaged parts use always original spare parts only.
- The manufacturer does not bear responsibility for any damages or injures to the
third persons, or to other equipment and property, resulted from disobedience to
instructions given in this manual.