Laski Predator, Руководство по эксплуатации

Страница: 50 / 59

Predátor P 56RX
50
Every 50 hours Check out tightening of bolted joints, especially of
guards and completeness of other parts.
Check out the rubber tracks for correct tensioning and
contingent damage.
Check out and adjust, if necessary, blower belt
tightness.
Clean the cyclone separator.
Every 250 hours
Cleaning of blower, ribbing and oil cooler.
Check out tightening of bolted joints.
Check out the fuel pre-filter for cleanness and replace
if necessary.
Change engine oil and the oil filter element.
Check out the air filter LED for function.
Do not retighten the cylinder head nuts.
Make sure that all retaining bolts on the cutting head
are tight.
Every 500 hours
Change the fuel pre-filter.
Check out and adjust, if necessary, valve clearance.
Check out all hydraulic elements for condition,
function and tightness.
Change hydraulic oil and the oil filter element.
Every 1000 hours Change the fuel filter.
Failures and Troubleshooting
Tab. 6 – Failures and repairs
Failure Cause Remedy
Engine
does not
start but it
is possible
to crank it Speed regulator lever in
STOP position Set the lever of speed
regulation to 1/2 start or max.
starting speed. The lever
should remain fixed there.
Emergency STOP button
activated Deactivate
Remote control OFF Turn it on
Cutting head switch ON Turn it off before starting