Laski Predator, Руководство по эксплуатации

Страница: 20 / 59

Predátor P 56RX
20
- Avoid steering when going up or down the ramps since this can be extremely
dangerous. If it is absolutely necessary to steer, first drive the machine back down
to the ground and off the ramps or back onto the vehicle / trailer bed and then
change the direction of travel and start back up or down the ramp again.
- Expand the track base and reduce the manoeuvring speed in order to avoid the risk
of tipping the machine over and skidding.
- Never operate any control levers except for the drive control levers when going up
or down a ramp. Actuating other levers can cause the machine to become
unbalanced and tip over.
- The machine will pivot on its tracks with a see-saw type action as it is driven over
the point where the ramp meets the trailer / vehicle bed. Be careful when going
over this point. Drive slowly on ramps.
- Fasten retention chains, straps or cables to the machine chassis. Do not put them
over or against hydraulic hoses. Make sure that they do not cause damage to rubber
tracks.
- Fasten each corner of the machine and fasten the front arm to the trailer / vehicle
bed with a chain / strap or a suitable anchor.
Product Delivery
-
This product is delivered completely mounted and attached to a wooden pallet.
- While handling you may use a lift truck or a crane with min. carrying capacity
of 2000 kg (suspension in the given lashing points only). For handling you need
min. ceiling height of 2 m.
- The manufacturer delivers this machine shrink-wrapped. The protective foil
protects the machine against weather effects but in no case against mechanical
damage, fall etc. The protective foil is recyclable, dispose it according to valid
local regulations.
- While putting the machine aside (e.g. at reloading) we recommend to place it
under a shelter.
- While unloading put the product always on a solid and level surface.
- It is not allowed to put it on a labile base.
-
It is not allowed to put any objects or tools on the machine.
Handling
After delivery unload the machine from the transport pallet as follows: