COD. 83119L.01EN
09//2016
33
-
Pay attention to the messages and alarms that the stove shows through the screen, write down even that
alarms and when they happened. This information is very useful for the user to start up again the stove as well
as it would make easier the work of the Technical Service.
-
Before turning on the stove you must verify there is nothing that clogs the air intake tube, the burner is fitted
properly and clean, the ashtray in its proper place and the front door which provides access to the combustion
chamber is fully closed. This door will only be opened when the stove is stopped and cold.
-
It is forbidden to remove the protection grille that is in the hopper.
-
Do not touch the stove with wet hands, as it is an electrical device. Switch the stove off before touch it.
-
A bad handling of the stove or an inadequate maintenance (that do not follow the procedure explained in this
manual), can cause serious damage to people, animals… In that case, the manufacturer will be exempt from
criminal or civil liability.
The stove experiences changes of expansion and contraction during the phases of heating and
cooling, so it is completely normal to hear some pops caused in the steel body. This, in any
case, can be considered a defect.
7.2 PELLET LOAD
Pellet load must be made in the upper side of the stove. Put the pellet in the hopper.
After a long inactivity, you need to remove the rests of pellet from the tank as they could have
absorbed dampness, changing their original characteristics and not being suitable for their use.
Do not ever remove the protection grille that is inside of the hopper. During the pellet load,
avoid that the pellet bag comes into contact with the hot surfaces. Put in the hooper only the
type of pellet that adapts to the specifications mentioned before.
7.3FIRST POWER-UP
1) Make sure the stove is connected to the electricity grid correctly.
2) Turn on the stove from the general switch, which is located in the upper side of the stove next to the plug
for the electrical outlet.
3) In the display on top appears the time and in the display that is below the room temperature:
Содержание AUDAX 10 KW
