Page 29
When you first install CorelDRAW the default settings in the program can cause operational issues for the laser, please make sure that you update the software.
These issues are that the default line thickness is 0.2mm which means that the laser will always engrave your work and will not perform the vector functions correctly.
The colour pallet that you use to set up your project cut order will not match up with the printer driver colours and finally the program will not let you engrave a
photograph and cut at the same time.
The below step by step guide will ensure that the software will match the printers requirements for issue free operation.
Step 1.
Open Up CorelDRAW and start a new blank page, set your page size accordingly but choose RGB as the colour space then click OK.
CorelDraw Setup for Lasers