LaserBit LB Series, Руководство пользователя

Страница: 52 / 69

LaserBit LB Series 4.3 page
52
In the ODIU there can be found four fuses, two for the transformer and the other two
for the head.
Fuses
On the primarily side, the fuse ratings are: T1,6A (250V)
- in the case of glassheater the fuses are T1,6A (250V)
On the secondary side, the fuse ratings are: T8A (250V)
On the glassheater-panel the fuses are T6,3A (250V)
Installing the ODIU box
The physical fixing of the ODIU box can be seen below.
Necessary toolkit:
•
Philips screwdriver
•
5mm wrench
•
Drilling machine with an Ø8mm bit (the minimum effective length is 50mm)
First you have to fix the ODIU box to the metal plate:
•
Pick the four M6x70 flat sphere headed screws, and take them to the holes
on the corners of the box
•
On the back of the box, where the screws came out, you have to put up the
four 6x40 spacers (these are the longer ones) to the legs of the screws
•
Pull on the metal plate to the legs of the screws
•
Fix the metal plate with four M5 nuts using the four washers, and four spring
washers like in the figure
Then you can fix the whole construction to a wall:
•
Drill four holes, using the metal plate for measuring the places of the bores,
with a Ø8mm bit. The depth of the bores have to be a minimum of 50mm
•
Put the four wall-plugs into the four holes