LARTET DC-24S, Руководство пользователя

Страница: 37 / 41

CHAPTER 4 COMMUNICATION PROTOCOLS 4-17
DC-24 and DC-25 operation manual
To set up the Wifi module using the Hyperterminal or any other program, you must follow
a time sequence. A time error on steps 5 and 6 forces to return to step 3.
4.3.1. Accessing Wifi module configuration
In order to access to Wifi module configuration the next steps must be followed:
1
– Connect the serial cable (see 4.3 “IP address”) between the computer and the display.
2
– Open Hyperterminal.
3
– Select the display’s parameter 7. See
¡Error! No se encuentra el origen de la referencia.
¡Error! No se encuentra el origen de la referencia.
4- Push the advance key. (Key *)
5
– Keep pushed the lower case letter
x before the display counters equals 0. Remain pushing
until the following screen is displayed.
The maximum delay since pushing the advance key (step 4) until to push x key is 10
seconds.