LARTET DC-24S, Руководство пользователя

Страница: 16 / 41

3-2 OPERATION CHAPTER 3
DC-24 and DC-25 operation manual
3.2.1. Modify parameters RS-485, Ethernet or Wifi.
To modify the parameters the user must access the three programming keys placed on the top
inside the display. See paragraph 3.1 to see how to access inside the display.
The programmation keys are placed in the top of the displays. The identification of the keys is
Advance key:
“* “
Increase key: “+”
To program the parameters, the three digits on the top are used. The left digit, identificated with
the digital point, indicates the parameter number and the two right digits indicate its value. The
flashing digit is the one the user can modify with the “+” key
To enter the menu, main the “*” key pressed for 3 seconds. Once this time is passed, the first
parameter is displayed.
There are then two options:
1- Modify the parameter value
By pressing the Advance key "*", entry is gained to modify the parameter value.
To go back to displaying the parameter number, press “*”again.
To increase the parameter value, press the “+” key.
2- Select another parameter
In order to select another parameter, the parameter number must be made to flash using the “*”
key and then the new parameter may be selected using the “+” key.