![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3742173054.webp)
54
Setting the DST
1.
Click
Setup
>
Common
>
Time
, and then click the
DST
tab.
2.
Select
On
for
DST
, set the start time, end time, and DST bias.
3.
Click
Save
.
Viewing Device Status
1.
You can view the current status of your camera.
2.
Click
Setup
>
Common
>
Basic Info
.
3.
Click
Refresh
for the latest status information.
4.
View the device information.
Upgrading the Device
If the device is managed by the central management server and you want to upgrade the devices in
batch mode, it is recommended to perform the upgrade operation on the central server. For detailed
steps, see the user manual for the central management server.
1.
Click
Setup
>
System
>
Maintenance
.
2.
Under
Firmware Upgrade
, click
Browse
and select the correct upgrade file.
3.
(Optional) Select the check box to enable
Upgrade Boot Program
.
4.
Click
Upgrade
and then confirm to start. The camera will restart automatically after the upgrade
is completed.
NOTE:
You must use the correct upgrade file for you camera. Otherwise, unexpected results may
occur.
The upgrade file is a ZIP file and must include all the necessary files.
The boot program loads the operating system and then the system starts running. The
upgrade boot program function is disabled by default, and only the camera will be upgraded
Содержание EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Страница 6: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Страница 33: ...33 The following shows an example time OSD...
Страница 61: ...61 Acronym Description WDR Wide Dynamic Range...