![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3742173037.webp)
37
Snapshot
1.
Click
Setup > Video > Snapshot.
2.
Select
On
, and then set resolution, most large and schedule as needed. Some parameters are
described in the table below.
Parameter
Description
Snapshot
Interval
Interval between two snapshots. For example, with Snapshot Interval set to 1 and
Number of Snapshot set to 2, the camera will take 2 snapshots (take one first and then
take another after 1 second).
Number to
Snapshot
Currently 1, 2, and 3 snapshots are allowed.
Snapshot
Mode
Schedule
: You need to set a snapshot time, e.g., 19:12:00, which means the camera
takes a snapshot at 19:12:00.
Repeat
: Allows you to set an interval(unit: sec). For example, according to the settings
shown in the figure above, 60 seconds must elapse before the camera takes another
two snapshots.
3.
Click
Save
.
Содержание EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Страница 6: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Страница 33: ...33 The following shows an example time OSD...
Страница 61: ...61 Acronym Description WDR Wide Dynamic Range...