![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3742173047.webp)
47
Configuring Tampering Alarm
Configure tampering alarm so that the camera reports a tampering alarm when the lens is blocked for a
certain length of time.
NOTE:
This function is not supported by some models, please see the actual model for details.
The alarm triggered actions may vary with models, please see the actual Web interface for
details.
1.
Click
Setup
>
Events
>
Tampering Alarm
.
2.
Turn on Tampering Alarm.
3.
Set detection sensitivity and duration for the camera to decide whether to report a tampering
alarm.
The camera can be more sensitive to the blocking even it only blocks the camera lens slightly
from a farther location when sensitivity is set to high. The camera reports an alarm when the lens
is blocked for a specified length of time.
Tampering alarm is effective to the whole screen. To disable tampering alarm, clear the
Tampering Alarm
check box.
4.
Set actions to be triggered by tampering alarms and the plan. For the detailed steps, see the
descriptions of alarm-triggered actions in
Configuring Motion Detection Alarm
5.
Click
Save
.
Содержание EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Страница 6: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Страница 33: ...33 The following shows an example time OSD...
Страница 61: ...61 Acronym Description WDR Wide Dynamic Range...