![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-cer-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3742173026.webp)
26
Exposure
NOTE:
This function may vary with models, please see actual Web interface for details. The default
settings are used for common scenes. Keep the default settings unless a particular scene is required.
1.
Click
Setup
>
Image
>
Image
and then click
Exposure
.
2.
Set the parameters as required. The following table describes some major parameters.
Parameter
Description
Exposure
Mode
Select the correct exposure mode to achieve the desired exposure effect.
Shutter (s)
Shutter is used to control the light that comes into the lens. A fast shutter
speed is ideal for scenes in quick motion. A slow shutter speed is ideal for
scenes that change slowly.
NOTE:
You can set a shutter speed when
Exposure Mode
is set to
Manual
or
Shutter
Priority
.
If
Slow Shutter
is set to
Off
, the reciprocal of the shutter speed must be greater
than the frame rate.
Содержание EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Страница 6: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Страница 33: ...33 The following shows an example time OSD...
Страница 61: ...61 Acronym Description WDR Wide Dynamic Range...