Larson Electronics EXPCMR-CER-IP-POE-4MP-IR-FLX.23-JB.3.SFC, Руководство пользователя

Страница: 52 / 62

52
2. Select On to enable IP address filtering.
3. Select the filtering mode and then enter the desired IP address(es).
4. Click Save .
NOTE:

If the filtering mode is set to Whitelist , only the specified IP addresses are allowed to
access the camera. If the filtering mode is set to Deny Access , the specified IP addresses
are denied for the access.

Up to 32 IP addresses are allowed. And the added IP addresses cannot duplicate.

The first byte of the IP address can only be a number ranging from 1 to 223 and the fourth
byte cannot be 0. For example, 0.0.0.0, 127.0.0.1, 255.255.255.255 and 224.0.0.1 all are
invalid IP addresses.
Access Policy
NOTE:
Enabling friendly password does not affect use. If you turn it off and log in with a weak
password, a page will pop up, prompting you to change the password. There is no Cancel or Close
button on this page. The default password is treated as weak.
1. Click Setup > Security > Network Security > Access Policy .
2. Select On to enable friendly password and MAC Authentication.
3. Click Save .
Hide Vendor Information
You can set to hide the vendor information of the network camera on the Web interface.
1. Click Setup > Security > Registration Info .
2. Select On .
3. Click Save .