SoundAdvisor Model 831C
Making a Time History Measurement With Sound Markers
16-4
Step 5
Select any additional settings on the Setup Manager tabs. For more information
on this process, see
6.2.2 Customizing Setup Values On the Setup Manager
Step 6
Press
Close
(
/*/
) and save your Setup.
Step 7
Set it as the
Active
setup file.
Step 8
Make a measurement as shown in
16.2 Making a Time History Measurement
.
16.2 Making a Time History Measurement With Sound Markers
The 831C Time History option also allows you to place sound type markers in
the time history data as the sounds occur or during your post measurement
analysis.
To make a measurement with sound markers, follow these steps:
Before you begin:
•
Complete steps 1–4 of
16.1 Setting up a Measurement With Time
.
Step 1
With your Time History setup file highlighted in the Setup Manager, press the top
softkey (
//*
) until the
Markers
tab appears.
FIGURE 16-1
Setup Manager Markers Tab
Step 2
If desired, edit the marker names.
Step 3
Select the checkbox in-line with the sound types which should generate sound
recordings this measurement.
TAKE NOTE
If you’re also planning to make sound recordings, section
