Lantronix SCS, Справочное руководство

Страница: 117 / 424

IP Examples
6-26
All incoming callers that do not specify a particular site (such as bob or frank) will use the default site for
the connection. To require that default site users use an IP address from the pool, use the
Define Site Default
IP Remoteaddress command.
Figure 6-57: Using the Address Pool for the Default Site
6.9.2 General IP Setup
The following figure illustrates the commands required for the average IP setup:
Figure 6-58: General IP Configuration
6.9.3 Adding Static Routes
All IP packets to unknown networks must be forwarded to Internet gateway router 192.0.1.110 . A default
route to this router must be configured on the SCS, and the route must be included in RIP updates to other
routers. The route must have a metric of 2.
Figure 6-59: Default Route to Router
Another router, 192.0.1.99 , provides access to the network 192.1.1.0 . This route must also be assigned a
metric of 2.
Figure 6-60: Static Route to Router
6.9.4 Default Routes to a Site
All IP packets to an unknown network must be forwarded to the Internet access provider. Site internet is
used to manage connections to this location.
A default route to internet must be configured on the SCS. The route must be included in RIP updates to
other routers; it must have a metric of two.
Figure 6-61: Default Route to Site
Local>> DEFINE SITE DEFAULT IP REMOTEADDRESS 192.0.1.100 192.0.1.105
Local>> DEFINE IP ADDRESS 192.0.1.11
Local>> DEFINE IP SUBNET 255.255.255.0
Local>> DEFINE IP NAMESERVER 192.0.1.45
Local>> DEFINE IP SECONDARY NAMESERVER 192.0.1.184
Local>> DEFINE IP DOMAIN “ctcorp.com”
Local>> DEFINE IP TIMESERVER 192.0.1.45
Local>> DEFINE IP SECONDARY TIMESERVER 192.0.1.455
Local>> DEFINE IP ROUTE DEFAULT NEXTROUTER 192.0.1.110 2
Local>> DEFINE IP ROUTE 192.1.1.0 NEXTROUTER 192.0.1.99 2
Local>> DEFINE IP ROUTE DEFAULT SITE internet 2