PremierWave EN User Guide
56
8:
Configurable Pin Manager
The Configurable Pin Manager is responsible for assignment and control of the configurable pins
(CPs) available on the PremierWave EN. There are nine configurable pins on the PremierWave
EN.
You must configure the CPs by making them part of a group. A CP Group may consist of one or
more CPs. This increases flexibility when incorporating the PremierWave EN into another system.
Note:
The
blue text
in the XML command strings of this chapter are to be replaced with
a user-specified name.
CPM: Configurable Pins
Each CP is associated with an external hardware pin. CPs can trigger an outside event, like
sending an email message or starting Command Mode on a serial Line.
The Current Configuration table shows the current settings for each CP.
Table 8-1 Current Configurable Pins
Table 8-2 CP Status
CP
Ref
Configured as
Value
Groups
Active in group
CP1
Pin 14
Input
0
1
<available>
CP2
Pin 16
Input
1
1
<available>
CP3
Pin 18
Input
0
0
<available>
CP4
Pin 20
Input
1
0
<available>
CP5
Pin 32
Input
0
0
<available>
CP6
Pin 27
Input
0
0
<available>
CP7
Pin 44
Input
0
0
<available>
CP8
Pin 38
Input
0
0
<available>
CP9
Pin 42
Input
0
0
<available>
CPM – CPs Status
Description
Name
Shows the CP number.
State
Shows the current enable state of the CP.
Type
Shows the CP hardware pin type. Can be updated. Choices are:
Input
Output
When a CP is configured as output, it can be toggled by setting the
value. Whatever value is given, the first bit 0) is used as the setting.
1 means asserted and 0 means de-asserted. Additionally, the CP
logic can be inverted so that assertion is low.
Value
Shows the last bit in the CP current value.
Bit
Visual display of the bitwise 32 bit placeholders for a CP.
