PremierWave EN User Guide
14
2:
Introduction
The PremierWave EN embedded Ethernet Device Server is a complete network-enabling solution
in a 30 (1.181) X 55 (2.165) X 6.45 (0.248) package. This miniature device server empowers
original equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet and/or
wireless networking and web page serving capabilities built into their products.
[DIMS = mm (in.)]
XSO21A200-01-S
XSO21R200-01-S
Key Features
Power Supply:
Regulated 3.3V input required. There is a step-down converter to 1.5V for the
processor core and 1.8V for the memory subsystem. All voltages have LC filtering to minimize
noises and emissions.
Controller:
32-bit ARM9 microprocessor running at 400 megahertz (Mhz) with 32 KB Data
Cache and 32 Kilobytes (KB). Instruction Cache
Memory:
Up to 64 MB SDRAM, 256 MB and Flash, and (Default 64 MB each). Up to 16 MB
serial SPI Flash (Default 8 MB).
Ethernet:
10/100 megabits per second (Mbps) Ethernet transceiver.
Wireless:
Dual Band
802.11 a/b/g/n with an on-board antenna and option for external antennas and diversity.
Serial Ports:
Two
high speed RS232/RS422/RS485 serial ports with all hardware
handshaking signals. Baud rate is software selectable (300 bps to 921600 bps). One
emulated serial port on the USB Device Port (up to Full Speed 12 Mbps), using standard CDC-
ACM protocol.
USB Ports:
Two USB 2.0 full speedOne USB 2.0 Full Speed (12 Mbps) host device port
Master/Slave high speed SPI interface
I2C interface
Configurable I/O Pins (CPs): Up to nine pins are configurable as general purpose I/Os if no
DTR or DCD is used on serial ports. Not 5V tolerant.
Interface Signals: 3.3V-level interface signals.
Configuration via CLI, XML and HTTP
Ethernet to wireless tunneling
Lantronix SmartRoam technology
Temperature Range:
Operates over a temperature range of -40°C to +85°C (-40°F to 158°F).
The storage temperature range is -40°C to 85°C (-40°F to 185°F).
