manualshive.com logo in svg

Lantronix PremierWave EN, Руководство пользователя

Поделиться
Скачать
Lantronix PremierWave EN Скачать руководство пользователя страница 49

6: Line and Tunnel Settings

PremierWave EN User Guide

49

To Configure Tunnel Connect Mode Settings

Using Web Manager

To configure the Connect Mode for a specific tunnel, click 

Tunnel

 in the menu and select

 

Tunnel 1 -> Connect Mode

.

Using the CLI

To enter the Tunnel 1 Connect Mode command level:  

enable -> tunnel 1 -> connect 

Using XML

Include in your file:   

<configgroup name="tunnel connect" instance="1">

Disconnect Mode

Specifies the optional conditions for disconnecting any Accept Mode or Connect Mode connection 
that may be established.  If any of these conditions are selected but do not occur and the network 
disconnects to the device, a Connect Mode connection will attempt to reconnect.  However, if none 
of these conditions are selected, a closure from the network is taken as a disconnect.

Block Serial

Set whether Block Serial is enabled for debugging purposes.  Choices are:

Enabled

 = If Enabled, incoming characters from the Serial Line will not be 

forwarded to the network.  Instead, they will be buffered and will eventually 
flow off the Serial Line if hardware or software flow control is configured.

Disabled

 = this is the default setting; incoming characters from the Serial Line 

are sent on into the network.  Any buffered characters are sent first.

Block Network

Set whether Block Network is enabled for debugging purposes.  Choices are:

Enabled

 = If Enabled, incoming characters from the network will not be 

forwarded to the Serial Line.  Instead, they will be buffered and will eventually 
flow off the network side.

Disabled

 = this is the default setting; incoming characters from the network 

are sent on into the Serial Line.  Any buffered characters are sent first.

Email on Connect

Select an email profile number to which an email notification will be sent upon 
the establishment of an accept mode tunnel.

Email on Disconnect

Select an email profile number to which an email notification will be sent upon 
the disconnection of an accept mode tunnel.

CP Output

Enter the CP Output Group whose value should change when a connection is 
established and dropped.  Connection Value specifies the value to set the CP 
Group to when a connection is established.  Disconnection Value specifies the 
value to set the CP Group to when the connection is closed.  To display the 
“Connection Value” and “Disconnection Value”, first enter a “CP Output Group”, 
then click outside that field.

Tunnel Connect Mode 
Settings (continued)

Description

Содержание PremierWave EN









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды