manualshive.com logo in svg

Lantronix PremierWave EN, Руководство пользователя

Поделиться
Скачать
Lantronix PremierWave EN Скачать руководство пользователя страница 26

5: Network Settings

PremierWave EN User Guide

26

To Configure Network Interface Settings

Using Web Manager

To modify Ethernet (eth0) settings, click 

Network

 on the menu and select 

Network 1 -> 

Interface -> Configuration

.

To modify Wireless (wlan0) settings, click 

Network

 on the menu and select

 Network 2 -> 

Interface -> Configuration

.

Using the CLI

To enter the eth0 command level: 

 enable -> config -> if 1

To enter the wlan0 command level:

  enable -> config -> if 2

IP Address

Enter the static IP address to use for the interface. You may enter it alone or in 
CIDR format.

Note:

This setting will be used if Static IP is active (both DHCP and BOOTP 

are Disabled). Changing this value requires you to reboot the device. When 
DHCP or BOOTP is enabled, the PremierWave EN tries to obtain an IP address 
from a DHCP or BOOTP server. If it cannot, the PremierWave EN generates 
and uses an Auto IP address in the range of 169.254.xxx.xxx, with a network 
mask of 255.255.0.0.

Default Gateway

Enter the IP address of the router for this network.

Note:

This setting will be used if Static IP is active (both DHCP and BOOTP 

are Disabled).

Hostname

Enter the hostname for the interface. It must begin with a letter or number, 
continue with a sequence of letters, numbers, or hyphens, and end with a letter 
or number.

Note:

This setting will take effect immediately, but will not register the 

hostname with a DNS server until the next reboot.

Domain

Enter the domain name suffix for the interface.

Note:

This setting will be used when either Static IP or Auto IP is active, or if 

DHCP/BOOTP is active and no Domain Suffix was acquired from the server.

DHCP Client ID

Enter the ID if the DHCP server requires a DHCP Client ID option. The DHCP 
server’s lease table shows IP addresses and MAC addresses for devices. The 
lease table shows the Client ID, in hexadecimal notation, instead of the 
PremierWave EN MAC address.

Primary DNS

Enter the IP address of the primary Domain Name Server.

Note:

This setting will be used when either Static IP or Auto IP is active, or if 

DHCP/BOOTP is active and no DNS server was acquired from the server.

Secondary DNS 

Enter the IP address of the secondary Domain Name Server.

Note:

This setting will be used when either Static IP or Auto IP is active, or if 

DHCP/BOOTP is active and no DNS server was acquired from the server.

MTU

When DHCP is enabled, the MTU size is (usually) provided with the IP address.  
When not provided by the DHCP server, or using a static configuration, this 
value is used.  The MTU size can be from 576 to 1500 bytes, the default being 
1500 bytes.

Network Interface 
Settings (continued)

Description

Содержание PremierWave EN









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды