Lantronix EMG 7500, Руководство пользователя

Страница: 77 / 482

6: Web and Command Line Interfaces
EMG™ Edge Management Gateway User Guide 77

Use the up and down arrows to scroll through previously entered commands. If desired, select
one and edit it. You can scroll through up to 100 previous commands entered in the session.

To clear an IP address, type 0.0.0.0, or to clear a non-IP address value, type
CLEAR
.

When the number of lines displayed by a command exceeds the size of the window (the
default is 25), the command output is halted until the user is ready to continue. To display the
next line, press Enter , and to display the page, press the space bar. You can override the
number of lines (or disable the feature altogether) with the
set cli
command.
General CLI Commands
The following commands relate to the CLI itself.
To configure the current command line session:
set cli scscommands <enable|disable>
Allows you to use Lantronix Secure Console Server (SCS)-compatible commands as shortcuts for
executing commands:
Note: Settings are retained between CLI sessions for local users and users listed in the
remote users list.
Table 6-3 SCS Commands
To set the number of lines displayed by a command:
set cli terminallines <disable|Number of lines>
Sets the number of lines in the terminal emulation (screen) for paging through text one screenful at
a time, if the EMG unit cannot detect the size of the terminal automatically.
To show current CLI settings:
show cli
To view the last 100 commands entered in the session:
SCS Commands Commands
info 'show sysstatus'
version 'admin version'
reboot 'admin reboot'
poweroff 'admin shutdown'
listdev 'show deviceport names'
direct 'connect direct deviceport'
listen 'connect listen deviceport'
clear 'set locallog clear'
telnet 'connect direct telnet'
ssh 'connect direct ssh'